Machine Maintenance
Registration
Follow the procedure below to adjust where to start printing on
fabric after checking the test pattern printed.
Look at the left, right, upper, and lower margins, and adjust
them if you want to shift the printing position. Doing this is usu-
ally not necessary.
Load the fabric in the tray. Align the fabric with the
corners of the table.
Pressthe[▼/Menu]key.
Press the [▲] or [▼/Menu] key to display [Mainte-
nance], and then press the [#Enter] key.
Press the [▲] or [▼/Menu] key to display [Registra-
tion], and then press the [#Enter] key.
Pressthe[▲]or[▼/Menu]keytodisplay[Pr.TestPat-
tern], and then press the [#Enter] key.
Press the [Start] key.
A test pattern to adjust the print start position is printed.
Check the optimal adjustment values on the printed test pat-
tern if necessary.
5
49