Printing on Fabric
Fixing Ink
Use the optional finisher to fix ink to the fabric.
•
As the A4 standard tray, A5 tray, and Sleeve & Socks Tray becomes
hot when continuously used on the optional finisher, give an interval
of five minutes or longer to set them after they are pulled out.
•
For reference, in the case of a commercially available heat press, ink
was fixed at 330°F (approx. 165°C) in 90 seconds.
•
When using the finisher, you can carry out heat press processing for
the fabric loaded in the A4 standard tray, A5 tray, or Sleeve & Socks
Tray.
2
27