Table of Contents
Advertisement
1. Make sure the communications and radio parameters on your computer are config-
2. Make sure Funk is selected as your security choice.
3. Start Intermec Settings.
4. Choose Communications > 802.11 Radio > Funk Security.
5. Select the profile you want to configure.
6. For Association, choose Open.
7. For Encryption, choose WEP.
8. For 8021x, choose TTLS, PEAP, or TLS.
9. If you chose TTLS or PEAP:
10. If you choose TLS:
11. Save your settings.
Configure LEAP Security With Funk
After you configure the communications and radio parameters on your computer and
select Funk as your security choice, you can configure LEAP.
1. Start Intermec Settings.
2. Choose Communications > 802.11 Radio > Funk.
3. Select the profile you want to configure.
4. For 8021x, choose LEAP.
5. For Association, choose Open, WPA, WPA2, or Network EAP. Encryption
6. For Prompt for Credentials, choose Enter credentials now.
7. Enter a User Name and User Password.
8. Save your settings.
Configure Static WEP Security With Funk Security
Use the following procedure to configure static WEP security with Funk. Honeywell rec-
ommends that you use WPA2-PSK instead of WEP if possible.
CV41 Vehicle Mount Computer (Windows CE) User Guide
ured.
a. Enter a User Name.
b. For Prompt for Credentials, choose Enter credentials now.
c. Enter a User Password.
d. For Validate Server Certificate, choose Yes.
a. Load a user and root certificate on your computer. For help, see
Certificate.
b. For Validate Server Certificate, choose Yes.
c. Enter a User Name and Subject Name.
automatically defaults to TKIP if you choose WPA, AES if you choose WPA2, and
WEP if you choose Open or Network EAP.
Load a
53
Advertisement
Table of Contents
