Change The Volume; Connect An External Antenna - Honeywell Intermec CV41 User Manual

Change the Volume

The CV41 can make sounds when you tap the screen or use an attached scanner. You
can change the CV41 volume to suit your needs and the environment.
1. On the keypad, tap ALT to enable the secondary keys.
2. Tap F9 to increase volume or F10 to decrease the volume.
3. Repeat Steps 1 and 2 to increase or decrease volume.

Connect an External Antenna

Caution: If the CV41 has connectors for external antennas, do not power
The CV41 comes with either an internal or external Wi-Fi antenna option. If you ordered
the external antenna option, you can purchase antennas to mount on a wall, forklift, or
other flat surface using screws or small patches of adhesive-backed hook and loop fas-
tener material.
Note: If you have the internal 802.11 antenna option, you cannot connect an external 802.11
antenna to your CV41. If you are using GPS or WWAN, you must connect an external GPS
or WWAN antenna.
1. Using your own hardware, secure the external antenna to a wall, forklift, or other flat
2. Secure the antenna to one of the antenna plugs on the CV41.
CV41 Vehicle Mount Computer (Windows CE) User Guide
up the CV41 without the external antennas connected.
Damage to the WLAN radio may result.
surface.
Wi-Fi
Wi-Fi (aux) GPS
antenna
antenna antenna
plug
plug plug
WWAN
antenna
plug
17