Adjust The Screen Brightness; Enable The Defroster - Honeywell Intermec CV41 User Manual

Vehicle mounted computer
Table of Contents

Advertisement

1. Clean the touch screen from fingerprints, lint particles, dust, and smudges. For
2. Peel off the backing from the film to expose the adhesive.
3. Slide one edge of the film between the touch screen and display housing.
4. Repeat Step 3 for the other three edges of the touch screen film.

Adjust the Screen Brightness

Depending on the current lighting conditions of the environment, you may want to
adjust the screen brightness of the CV41.
Note: If the ambient light sensor is enabled, you cannot adjust the screen brightness on the
CV41.
1. On the keypad, tap the ALT key to enable the secondary keys.
2. Tap F7 to increase brightness or F8 to decrease the brightness.
3. Repeat Steps 1 and 2 to increase or decrease brightness.

Enable the Defroster

If your CV41 contains a defroster, use it to help reduce condensation on an external sur-
face when the computer is moving between sub-freezing and normal temperatures.
1. Tap Start > Settings > Control Panel > Intermec Settings. The Intermec Settings
2. Tap Device Settings > Heater. The Heater screen appears.
3. In Screen heater, select Enabled.
4. In Screen heater turns on at:, set the temperature tripping point in degrees Celsius.
5. Tap OK to save and exit the Heater screen.
16
more information, see
screen appears.
When the temperature reaches the trip point, the heater automatically turns on.
Clean the
Computer.
CV41 Vehicle Mount Computer (Windows CE) User Guide

Advertisement

Table of Contents
loading

Table of Contents