Table of Contents
Advertisement
1. Start Intermec Settings. For help, see
2. Choose Communications > 802.11 Radio > Security Choice.
3. From the Security Choice list, select Microsoft Security. An alert box appears
4. Tap Yes. The computer resets and starts with Microsoft Security as the Security
Configure WPA or WPA2 Enterprise (802.1x) Security With Microsoft
Use these procedures to set WPA-802.1x security on your computer with Microsoft
security.
1. Make sure the communications and radio parameters on your computer are config-
2. Start Intermec Settings.
3. Choose Communications > 802.11 Radio > Microsoft Security.
4. For Infrastructure Mode, choose Infrastructure.
5. For Network Authentication, choose WPA or WPA2. Data Encryption automatically
6. For 802.1x Authentication, choose either TLS or PEAP.
7. If you choose TLS:
8. If you choose PEAP:
Enable WPA or WPA2 Personal (PSK) Security With Microsoft
Use the following procedure to enable WPA-PSK With Microsoft Security.
CV41 Vehicle Mount Computer (Windows CE) User Guide
telling you that you must save your settings and reboot the computer for the new
security choice to take effect.
Choice.
ured.
defaults to TKIP for WPA and AES for WPA2.
a. Load a user and root certificate on your computer. For help, see
Certificate.
b. Choose Properties. The Certificates dialog box appears.
c. Select the certificate you want to use from the list. The User Logon dialog box
appears.
d. Enter a User Name and Domain and tap OK.
e. Tap OK to exit the Certificates dialog box.
f.
Tap OK to save the Microsoft Security settings.
a. Load a root certificate of the authentication server on your computer. For help,
see
Load a
Certificate.
b. Tap OK to save the security settings and the User Logon dialog box appears.
c. Tap a User Name, Password, and Domain. Select Save Password if you want to
save the password for future authentication sessions.
d. Tap OK to save the Microsoft Security settings.
Start Intermec
Settings.
Load a
55
Advertisement
Table of Contents
