About The Smart Dock; Attach The Cv41 To The Smart Dock - Honeywell Intermec CV41 User Manual

Vehicle mounted computer
Table of Contents

Advertisement

About the Smart Dock

The smart dock is secured to a forklift using a RAM mounting kit and provides condi-
tioned power to the CV41. The CV41 can then be connected or removed from the smart
dock at any time. With this unique system, you can easily move the CV41 from one vehi-
cle equipped with the smart dock to another. Additionally, the dock provides:
To connect any accessory such as a tethered scanner, an audio headset, or a USB flash
drive, you need to purchase the correct accessory cables. For more information, contact
your Honeywell representative.
Caution: Make sure the smart dock is powered off before you connect any

Attach the CV41 to the Smart Dock

Once you have secured the smart dock and connected it to power, attach the CV41 to
the smart dock.
1. Press and hold the Power button on the CV41 until the computer turns off.
2. Locate the protruding lip on the rear of the CV41.
3. Place the lip of the CV41 over the top of the dock.
4. Slide the CV41 from side-to-side until the CV41 is seated into the smart dock.
5. Push down onto the smart dock until you hear a click.
6. If necessary, adjust the viewing angle by adjusting the pivot arm on the RAM mount.
7. Press the Power button on the smart dock to turn on the dock.
CV41 Vehicle Mount Computer (Windows CE) User Guide
a USB port
two COM ports
a CANBUS/audio port
strain relief cable mounts
cables to it.
7

Advertisement

Table of Contents
loading

Table of Contents