About The Auto-On Feature; Enable The Auto-On Feature; Disable The Auto-On Feature - Honeywell Intermec CV41 User Manual

Vehicle mounted computer
Table of Contents

Advertisement

About the Auto-On Feature

The Auto-On feature turns on the CV41 when you apply external power to the computer.
When Auto-On is disabled, the CV41 monitors the ignition input signal and turns on the
computer when the ignition on your vehicle is active.
To disable the Auto-On feature, you must wire the ignition input wire from your CV41 to
your vehicle to monitor the ignition input signal. For more information, see the CV41
Vehicle Mounting Kit Reference Guide.

Enable the Auto-On Feature

When Auto-On is enabled, the CV41 turns on when external power is applied. For exam-
ple, when the smart dock is powered on and:
1. Tap Start > Settings > Control Panel > Options. The Options screen appears.
2. Tap the Misc tab.
3. Select Enable Auto-On and tap OK.

Disable the Auto-On Feature

When Auto-On is disabled, the CV41 is turned off, and the ignition input signal:
When the Auto-On is disabled, the CV41 is turned on, and the ignition input signal:
1. Tap Start > Settings > Control Panel > Options. The Options screen appears.
2. Tap the Misc tab.
3. Make sure that Enable Auto-On is not selected and tap OK.
60
the CV41 is placed into the dock.
the CV41 is placed into the dock and the vehicle is turned on.
is inactive, the CV41 remains off.
changes to active, the CV41 turns on.
changes to active, the CV41 stays on.
changes to inactive, the CV41 is placed into Suspend mode.
CV41 Vehicle Mount Computer (Windows CE) User Guide

Advertisement

Table of Contents
loading

Table of Contents