Create A Vpn Server Connection; About Wireless Security - Honeywell Intermec CV41 User Manual

Create a VPN Server Connection

You can create a Virtual Private Network (VPN) connection to securely connect to serv-
ers, such as a corporate network, through the Internet. Before you can create a VPN
connection, you need this information from your network administrator:
•
•
•
•
•
After you have located this information, you can create a VPN server connection.
1. Tap Start > Settings > Control Panel.
2. Double-tap Network and Dial-up Connections.
3. Double-tap Make New Connection.
4. Double-tap either Virtual Private Network (PPTP) or Virtual Private Network
5. Step through the screens to set up your VPN connection.

About Wireless Security

The computer provides five types of security for your wireless network:
•
•
•
•
•
This section explains how to configure wireless security on your computer. Honeywell
recommends that you implement WPA2 security using PSK (Personal) or 802.1X
(Enterprise) key management as appropriate.
You must use either Funk or Microsoft security to implement your security solution. For
details, see the next section,
recommends that you always implement WPA2 security using PSK (Personal) or 802.1X
(Enterprise) key management.
If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this section also
assumes that your authentication server and authenticators are properly configured.
Note: Your security choice does not depend on your authentication server. For example, you can
choose Funk security if you use Microsoft Active Directory® to issue certificates.
50
User name
Password
Domain name
TCP/IP settings
Host name or IP address of the VPN server
(L2TP).
Wi-Fi Protected Access 2 (WPA2™)
Wi-Fi Protected Access (WPA)
802.1x
LEAP
WEP
Choose Between Microsoft and Funk Security
CV41 Vehicle Mount Computer (Windows CE) User Guide
Honeywell