Power Supply Options - Honeywell Intermec CV41 User Manual

Vehicle mounted computer
Table of Contents

Advertisement

Power Supply Options

To use the CV41, you must apply power to it. By default, the CV41 comes with a DC
power cable that connects directly to a forklift battery running 10-60 VDC power. Other
power supply options include:
Caution: Be sure to use the proper dock for the application. See
The AC/DC power supply must be connected to a 120 V, 60 Hz supply in North America,
or to a 230 V, 50 Hz power supply outside of North America (appropriate AC cable not
included). Make sure that the external AC power is properly grounded and provides a
maximum of 15 A of overcurrent protection (10 A for 230 V circuits). For more informa-
tion on installing any of these power supply options, see the CV41 Vehicle Mounting Kit
Reference Guide.
Note: In North America, the AC power supply is intended for use with a UL Listed ITE power
supply with an output rating of 12 to 48 VDC, minimum 15 W. Outside of North America,
the power supply is intended for use with an IEC certified ITE power supply with an output
rating of 12 to 48 VDC, minimum 15 W.
Contact your Honeywell representative to order one of the power supply options listed.
For installation instructions, see the CV41 Vehicle Mounting Kit Reference Guide.
6
1 GB flash memory with user-installable expansion slot supporting an additional 1
to 4 GB SD card
802.11a/b/g and Bluetooth® radios
Optional WWAN radio (available in North America, Europe, and Australia only)
Intel Atom 1.6 GHz processor
The CV41 Vehicle Mount Computer has an IEEE 802.11a/b/g radio installed
and Wi-Fi® certified for interoperability with other 802.11a/b/g wireless LAN
devices.
External 6-96 DC/DC Power Converter (requires
External AC/DC Power Supply (requires
Docks
for information.
Enhanced Dock for Off-Vehicle
CV41 Vehicle Mount Computer (Windows CE) User Guide
Standard
Dock)
CV41
Use)

Advertisement

Table of Contents
loading

Table of Contents