Connect To A Serially Tethered Scanner - Honeywell Intermec CV41 User Manual

For the SR30 or SR61T, you must purchase the correct scanner USB cable to use with
the CV41. For more information, see the following table.
Scanner Model
SR30
SR61T (Gen 1)
SR61T (Gen 2)

Connect to a Serially Tethered Scanner

Use this procedure to connect your computer to connect a tethered scanner and enable
RS-232 communications. For the SR30 or SR61T, you must purchase the correct serial
cable to use with the CV41. For more information, see the following table.
Scanner Model
SR30
SR61T (Gen1, Gen 2)
1. Connect the scanner to the COM1 or COM2 port.
2. From the Intermec Settings main menu, select Tethered Scanner (COM 1 or COM
3. Tap Scanner Settings.
CV41 Vehicle Mount Computer (Windows CE) User Guide
Required Cable
6.5 ft (1.9 m) cable (P/N 236-164-002)
•
•
2).
Required Cable
6.5 ft (1.9 m) cable (P/N 236-159-002)
6.5 ft (1.9 m) cable (P/N 236-182-001)
6.5 ft (1.9 m) cable (P/N 236-240-001)
6.5 ft (1.9 m) cable (P/N 236-197-001)
12 ft (3.6 m) cable (P/N 237-197-001)
47