Brightness; Language; Auto Clean Cycle; Soft Water Cycle - HotSpring LIMELIGHT Prism Owner's Manual

To activate the Summer timer, simply follow these steps:
• Press the OPTIONS Hard button on the Control panel.
• Press the soft button next to Set up.
• Press the soft button next to
Summer timer to activate. The
Summer timer icon (on the Home
Screen) will display when activated.
IMPORTANT: If water temperature falls
below 80°F (26.7°C) the summer timer
will automatically be disabled.
• The Summer timer should be
deactivated when cooler temperatures return. To do this, simply repeat
last 3 steps. The yellow Summer timer icon will turn off.

BRIGHTNESS

If you would like to change the brightness of the control panel screen:
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-up.
• Press the soft button next to
Brightness to lower the brightness
from 7 down to 1.
IMPORTANT: Pressing the Brightness soft button at number 1 will
increase the screen brightness back to 7.

LANGUAGE

The Control panel screen can be viewed in seven different languages.
The languages are English, French, German, Dutch, Swedish, Norweign,
and Spanish. To change languages:
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to Set-Up.
• Press the soft button next to More
• Press the soft button next to Language
until the desired language is visible.
IMPORTANT: Should you accidently change the language screen into a
language you don't know, simply repeat the previous steps where Set-up
is in the top right corner and Language is in the lower right corner.

AUTO CLEAN CYCLE

The Auto Clean Cycle will activate the jets for 10 minutes total time every
24 hours starting at the time ON was first pressed.
• Press the OPTIONS hard button on the Control panel.
• Press the soft button next to Set-Up
• Press the soft button next to More
• Press the soft button next to Auto
Clean Cycle
VANISHING ACT CYCLE
The VANISHING ACT Cycle will activate the jets for 6 hours, ONLY to be
used with VANISHING ACT (see page 11)
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to Set-Up
• Press the soft button next to More
• Press the soft button next to VANISHING ACT
Operating Instructions
FRESHWATER SALT SYSTEM
If your spa has the FRESHWATER Salt
System installed you can navigate to the
screen as follows:
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to
FRESHWATER Salt System.
(see FRESHWATER Salt System owner's manual for more information).
AUDIO
(OPTIONAL)
If a wireless audio sound system is
installed, both the Home screen and
the Options screen will display the
Audio function.
To enter the Audio menu screen:
• Press the soft button next to Audio.
TO TURN AUDIO SYSTEM ON/OFF
• Press the soft button next to Audio OFF to turn the Sound System
on or off next to Audio ON. Audio must be ON to advance the audio
screens.
TO PAIR BLUETOOTH
Press the Function:SET soft
1.
button 3 times to advance to the
Enter Setup screen. Press the
Enter Setup soft button to advance
to the Setup Source screen.
Bluetooth should be selected.
Press SETUP Source soft button
2.
6 times from SETUP Source screen to advance to the PAIR screen.
3. Press PAIR soft button followed by pressing "connect" next to My
Spa BTXR on your device to pair. If you do not see this, another
device may already be connected (see To Disconnect Bluetooth on
following page).
After pairing, you will be ready to use your Bluetooth device. Only one
paired Bluetooth device will work at a time.
TO ADJUST VOLUME
• Press the soft button next to ▲ or
▼ to change the volume level.
• Press the Function:SET soft button
to advance to the Play/Pause
function screen.
Page 17
(OPTIONAL)