Jets Control; Light Control; Summer Timer - HotSpring LIMELIGHT Prism Owner's Manual

SPA LOCK
To activate the Spa Lock:
• Press the OPTIONS hard button.
• Press the soft button next to Set-up.
• Press the soft button next to Spa Lock Off.
IMPORTANT: The Temperature/Spa Lock icon will be displayed while
the screens are locked.
To deactivate the Spa Lock:
• Press and hold the OPTIONS hard button and the LIGHTS hard button
at the same time for 3 seconds. The spa lock icon will turn off.
IMPORTANT: You can activate the spa lock feature even when
the temperature lock is already on. You do not need to turn off the
temperature lock in order to turn on the spa lock feature. If the
temperature lock was already on when you activate the spa lock, it
will remain on when you turn off the spa lock.

JETS CONTROL

The PRISM model has 3 jet pumps, Jet 3 can be found in the lower right
corner of the jets screen (not illustrated). The third jet pump can only be
activated by pressing the soft key next to Jet 3.
The jets icon (on the Home Screen) will remain lit until the button is
pressed to turn off the jet pump(s), or after two hours of continuous
operation when the pump(s) is automatically shut off by the control system.
The jet pump(s) will turn themselves off after two hours of continuous operation
to prevent overheating and conserve energy in case you forgot they were on.
The jets can be restarted again with no delay.
IMPORTANT: The jet pumps will not function while the spa lock feature
is activated.
You may also run through the entire jet pump cycle by only using the
JETS hard button as follows:
PRISM , PULSE, FLAIR & FLASH
1st Press = Jet pump 1 on Low
3rd Press = Both jet pumps on
high speed
5th Press = Jet pump 2 on High 6th Press = All pumps off
BEAM
1st press = jet pump on High
When activated, the Spa Lock
feature disables all functions on the
control panel. It prevents others from
tampering with the jets, lights and
temperature settings on your spa. The
control panel will not respond to any
hard or soft buttons when pushed in
Spa Lock mode.
The JETS hard button activates the jet
pumps. When the JETS hard button is
pressed, the jets menu will be displayed
on the control panel with Jet 1 in the
Low position, the Jet Pump icon will
also display on the home screen. Press
any of the soft keys to change the jet
functions between high or low (when
available) speed, and off.
2nd Press = Jet pump 1 on High
4th Press = Jet pump 1 on
Low, Jet pump 2 on high
2nd press = jet pump OFF

LIGHT CONTROL

All HOT SPRING spas are equipped with Multi-Color lighting.
Pressing the LIGHTS hard button will turn on both the Interior and
Exterior lights.
IMPORTANT: Pressing the hard light button a second time will dim
interior to 2, press hard light button a third time will dim interior to 1,
press hard light button a fourth time will dim interior to off, press the
hard light button a fifth time will shut all lights off.
Using the screen to change the intensity of the spa's Interior lights:
• Press the soft button next to Dimmer.
There are three (3) brightness levels
plus off.
IMPORTANT: Pressing the LIGHTS
hard button several times will also
change the intensity of the spa's
Interior lights when in the Interior
Lights screen from brightest to off,
back to brightest.
To change the color of the Interior lights:
• Press the soft button next to Color.
The colors are as follows: 1) Blue, 2) Aqua, 3) Green, 4) White, 5)
Yellow, 6) Red, 7) Magenta, 8) Color Wheel On, 9) Color Wheel Off.
NOTE: Lights icon on the Home Screen will flash whenever the Color
Wheel is on.
Press Lights Off To turn off all of the lights:
Exterior lights:
• Press the soft button next to Exterior
Lighs to view the Exterior Lights
screen.
• For Dimmer and Color functions see
Interior Lights information above.
• Press the soft button next to Daily
Lights to turn on the 24 hour external light time. Activating the timer
will turn external lights on for 6 hours at the same time every day.
• Press the soft button next to Daily Lights a second time to turn the
timer Off
• Press the soft button next to Interior Lights to return to the Interior
Lights menu.

SUMMER TIMER

Your HOT SPRING spa is equipped with a summer timer. The
summer timer can be activated during extremely hot summer months
to maintain water temperatures. Activating the summer timer causes
the heater to immediately shut down. The circulation pump will remain
on for approximately 5 minutes pushing water through the heater to
cool it down. Both heater and circulation pump will then remain off for
eight hours. The summer time icon will be displayed on the control
panel and will remain displayed for as long as the summer timer is on.
The circulation pump and heater will automatically shut down for the
same eight hours every day until the summer timer is deactivated. It is
recommended to activate the summer timer in the morning so that the
spa is off during the hottest part of the day and so that the circulation
pump will start up again in the evening when you are ready to enjoy the
spa again.
IMPORTANT: The Summer timer will not lower the spa's water
temperature below the ambient air temperature. Ambient conditions,
including humidity, wind and shading will affect your spa water
temperature.
Page 16
Operating Instructions