Dimension Drawings; 9" Device Dimension Drawing - Siemens SIMATIC TP900 Comfort INOX PCT Compact Operating Instructions

Note that the IP degree of protection and the enclosure type are only guaranteed if the
following is observed:
● The mounting gasket fits completely to the mounting cut-out, see section "Inserting the
mounting seal (Page 23)".
● The conditions for the mounting cut-out. Read the corresponding information in section
"Notes on installation (Page 22)".
● The device has been installed according to the information provided in this document.
5.7

Dimension drawings

5.7.1

9" device dimension drawing

All dimensions in mm
Comfort Panels INOX PCT
Compact Operating Instructions, 05/2018, A5E38804191-AA
Technical specifications
5.7 Dimension drawings
41