Calibrate Touch Screen; Recycling And Disposal - Siemens SIMATIC TP900 Comfort INOX PCT Compact Operating Instructions

Maintenance and repairs

4.6 Calibrate touch screen

Glass front
The edge grouting has sufficient chemical resistance when used as intended (see Product
overview).
Resistance
The resistance of the edge grouting to various chemicals has been tested.
You can find the list of substances against which the grouting compound has been tested on
the Internet (https://support.industry.siemens.com/cs/ww/en/view/39718396) under
Customer Support – FAQ.
NOTICE
Risk of damage to the device
When cleaning the device, only use the application concentration specified by the
manufacturer of the cleaning agent or the concentration specified in the list.
Cleaning with a combination of substances may have varying effects.
If you clean the equipment with substances that are not tested or unsuitable for the device or
with suitable substances in concentrations higher than those specified, we recommend the
following:
● Cover the device during cleaning of the system.
● Clean the device separately using a suitable procedure.
4.6 Calibrate touch screen
The capacitive touch screen does not require calibration. No recalibration even after a longer
period of time as is the case with a resistive touch screen.
4.7

Recycling and disposal

The HMI devices described in these operating instructions can be recycled due to their low
levels of pollutants. Contact a certified disposal service company for environmentally sound
recycling and disposal of your old devices.
32
Compact Operating Instructions, 05/2018, A5E38804191-AA
Comfort Panels INOX PCT