Figure 6.10 Hose/Scrubber Locations; Figure 6.11 Removing The Scrubber Housing - Carrier XtendFRESH Operation, Service And Parts Manual

1. Lower the back panel
2. Unplug the scrubber heaters.
3. Loosen the hose clamps and remove the hose from the scrubber filter assembly, top and bottom
6.10).
4. Remove the two bolts securing the scrubber housing to the top mounting bracket. Turn the scrubber housing
10 degrees to remove it from the unit
Original XtendFRESH units have a tall exhaust port and port cap
in order to remove the housing.
5. Move the scrubber housing to a clean area for disassembly.
6. Remove the four bolt and spring assemblies holding the scrubber housing together
T-366

Figure 6.10 Hose/Scrubber Locations

Desorb In
(Figure 6.4).
(Figure 6.11).

Figure 6.11 Removing the Scrubber Housing

R e m o v e
M o u n t i n g
Bolts (2)
Scrubber Filter
Assembly
Desorb Out
NOTE
(Figure
6–8
3.2) and need to be removed
Turn Housing
to remove
(Figure 6.12).
(Figure