3.1
GENERAL DESCRIPTION
3.1.1
Refrigeration Unit - Front Section
The refrigeration unit is designed so that the majority of its components are accessible from the front
A manually operated venting system is located in the upper left access panel. Behind this left access panel are
located the CO
sensor and O
2
TM
FRESH
Controlled Atmosphere option. This panel may be removed to allow entry into the evaporator section
where the CO
scrubber and other components are located.
2
XtendFRESH
Control Box
3.1.2
Evaporator Section
Components of the XtendFRESH option are mounted in the evaporator section in addition to the standard refriger-
ation unit components. These components
Assembly and Sensor Package.
Air from within the container is passed to the O
The controller calculates O
SECTION 3
DESCRIPTION
sensor. The right access panel contains integrated components of the Xtend-
2
Figure 3.1 Refrigeration Unit - Front
(Figure
sensor and CO
2
and CO
values in order to maintain the preset values.
2
2
3.2) include the XtendFRESH Scrubber Assembly, Motor
sensor. Data is then supplied to the controller.
2
3–1
(Figure
3.1).
XtendFRESH
Panel
T-366