End-Policy-Map - Cisco CRS Command Reference Manual

Quality of Service Commands on the Cisco IOS XR Software

end-policy-map

To end the configuration of a policy map and to exit policy map configuration mode, use the end-policy-map
command in policy map configuration mode.
end-policy-map
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
Policy map configuration
Command History
Release
Release 3.6.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
qos
Examples
The following example shows how to end the policy map configuration and exit policy map configuration
mode.
RP/0/RP0/CPU0:router(config)# policy-map policy1
RP/0/RP0/CPU0:router(config-pmap)# class class1
RP/0/RP0/CPU0:router(config-pmap-c)# police
cir
250
RP/0/RP0/CPU0:router(config-pmap-c)# set precedence 3
RP/0/RP0/CPU0:router(config-pmap)# end-policy-map
RP/0/RP0/CPU0:router(config)#
OL-23235-03
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
Modification
This command was introduced.
Operations
read, write
end-policy-map
21