Advertisement
Available languages
Available languages
If water leaks from the space between gearbox housing and water
supply, stop working and have the tool repaired in an authorised
service workshop.
Overhead-drilling only with suitable safety measures (water collection).
Keep the handles dry, clean and free of oil and grease.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
When working with this tool, wear ear protectors, dust mask and
goggles.
Always work concentrated. Always work in a carefully considered
way and do not use the tool when you are not concentrated.
Always hold the machine with both hands and maintain a safe
standing position. Always consider the reaction moment of the
tool.
For further safety instructions, please refer to the enclosures!
First, check the correspondence between voltage and frequency against the
data mentioned on the identification plate. Voltage differences from
+ 6% to – 10% are allowed. The END 712 P is made in protection class II.
For protection purposes, the machine can only be run with a GFCI. For this
reason, the END 712 P is standard delivered with an integrated PRCD
protective switch which can be used for a ground socket.
Attention!
The PRCD protective switch must not lay down in water.
!
PRCD protective switches must not be used to switch the
tool on and off.
Before starting your work, check the proper function by
pressing the TEST button.
Only use extension cords with a sufficient cross-section. A cross-section
which is too small might cause a considerable drop in performance and an
overheating of machine and cable.
Electrical Connection
13
Advertisement
