Hard Disk Drive - NEC Express5800 Series User Manual
Hide thumbs
Also See for NEC Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.16
Hard Disk Drive
Bays for hard disk drives are provided at the front of the server.
A hard disk drive mounted in a dedicated drive tray can be purchased. Install the hard disk drive on the server
with it mounted in the drive tray.
Note the following precautions to install hard disk drives.
•
For onboard connection, hard disk drives having different capacities, types, or rotational speeds cannot
be installed together.
•
In the RAID system, all the hard disk drives in an array group must have the same capacity, type, and
rotational speed.
•
If using hard disk drives in a RAID system, jumper settings or a change of cables may be required.
Bays can contain up to eight hard disk drives.
Unique slot numbers have been assigned to each slot.
Slot 0
Slot 1
94
Important
Use hard disk drives specified by NEC. Installing a third-party hard disk
drive might cause a failure of the server as well as the hard disk drive.
Slot 2
Slot 4
Slot 3
Slot 5
Express5800/R120f-1E User's Guide
1. Installing Internal Options
Slot 6
Slot 7
Advertisement
Table of Contents
