Removing Fbu - NEC Express5800 Series User Manual

Chapter 2 Preparations
8. Remove one screw from the blank
cover on the PCI riser card (removed
in step 2) on which you are going to
mount the RAID controller, then
remove the blank cover.
9. Mount the RAID controller to the PCI
riser card, and secure it with one
screw removed in step 6.
10. Mount the PCI riser card removed in
step 2.

1.10.5 Removing FBU

Remove the FBU in reverse order of installation procedure.
74
Note
Keep the removed blank cover for future use.
Express5800/R120f-1E User's Guide
1. Installing Internal Options