Chapter 3 Setup
5. On the following screen, choose Enable when you use DHCP, or select Disable and specify IP
Address, Subnet Mask, Default Gateway, and DNS Server when you do not use DHCP.
6. Connect a LAN cable to the management LAN connector. Access EXPRESSSCOPE Engine 3 by using
"PC for management" according to the settings of step 5.
Tips
If the web feature, remote media/KVM feature or command line interface feature is
interrupted when enabling the Shared BMC LAN, wait for a while and connect with
network again.
Figure at IPv4 Property
Express5800/R120f-1E User's Guide
3. EXPRESSSCOPE Engine 3
123