Removal - NEC Express5800 Series User Manual

Chapter 2 Preparations
6. Slowly close the handle.
The tray is locked making a clicking sound.
7. Run BIOS Setup Utility, and then specify the boot order from Boot menu.
For details, see Chapter 2 (1. System BIOS) in "Maintenance Guide"

1.16.2 Removal

To remove hard disk drive, reverse the installation procedure.
If you transfer or dispose of the removed hard disk drive, see Chapter 1 (1. Transfer, Relocation, and Disposal)
in "Maintenance Guide" to erase data.
Run the BIOS Setup Utility, and then specify the boot order from Boot menu.
For details, see Chapter 2 (1. System BIOS) in "Maintenance Guide".
96
Note
When you push the drive into the slot, confirm the handle got hooked on the
frame.
Tips
The saved boot order is cleared when a hard disk drive is added.
Important
NEC assumes no liability for data leakage should the product be
transferred to a third party without erasing the data.
Note
• If you remove a hard disk drive due to a failure, check the slot with its
DISK LED 2 lit in amber.
DISK LED 1
• Do not hold handle to pull the drive out. Doing so may damage the handle.
Tips
The saved boot order is cleared when a hard disk drive is added.
Express5800/R120f-1E User's Guide
DISK LED 2
1. Installing Internal Options