NEC Express5800 Series User Manual page 34

Chapter 1 General Description
LED pattern
STATUS LED 1 STATUS LED 2
Off On (amber)
Off Flashing
(amber)
34
Description
A temperature alarm was detected.
A CPU error occurred.
Abnormal CPU temperature is detected.
A PCI system error occurred
A PCI parity error occurred
A PCI bus error occurred.
A voltage alarm was detected.
Fan error was detected.
Sensor error was detected.
A CPU temperature alarm was detected.
An error occurred on Intel Node Manager
(one of the features of EXPRESSSCOPE
Engine 3).
Power supply unit is failing (in power
redundant configuration).
A fan alarm was detected.
A temperature warning was detected.
A voltage warning was detected
One or more hard disk drives are failing
(excluding RAID0 or non-RAID
configuration).
Express5800/R120f-1E User's Guide
4. Names and Functions of Parts
Solution
Check the internal fan for dusts. Also check if
the fan unit is properly connected.
If the LED indication does not change, contact
your sales representative.
Turn the power off and then turn it on.
If POST displays any error message, take
notes of the message, and contact your sales
representative.
Contact your sales representative.
Contact your sales representative.
Check if the internal fan cable is properly
connected.
If the LED indication does not change, contact
your sales representative.
Check the internal fan for dusts. Also check if
the fan unit is properly connected.
If the LED indication does not change, contact
your sales representative.
Contact your sales representative.