NEC Express5800 Series User Manual page 84

Chapter 2 Preparations
PCI slot performance
Produc
Model
t name
Transfer bandwidth
Available card size
N8104-148 10GBASE Adapter
(SFP+/2ch) [PCI Express 2.0(x8)]
N8104-153 10GBASE-T Adapter (2ch)
[PCI Express 2.0(x8)]
N8104-154 1000BASE-T LOM Card
(4ch) [PCI Express 2.0(x4)]
N8104-155 10GBASE-T LOM Card
(2ch) [PCI Express 3.0(x8)]
N8104-156 10GBASE-SFP+(2ch)+
1000BASE-T(2ch) LOM Card
[PCI Express 3.0(x8)]
N8104-146 InfiniBand Adapter (1ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8104-147 InfiniBand Adapter (2ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8117-01A Additional RS-232C connector *3
: Can be mounted, –: Cannot be mounted
Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
*1
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
84
Slot number #1A
PCI standard
*1
PCI card type *2 x8 socket
(per lane) *1
Slot size
For RAID
controller
–
–
–
–
–
–
–
–
Express5800/R120f-1E User's Guide
Riser card (PCIex16)
#1C
#1B (2 CPUs
required)
PCIe 3.0
x8 lane X16 lane
X16 socket
8Gb/s
Full height
For LOM
card
220 mm max.
– 
– 
 –
 –
 –
– 
– 
– 
1. Installing Internal Options
#1D
(2 CPUs
required)
Remarks
Low profile
 For additional LAN port
Prepare SFP+ module
N8104-129 if needed.
 For additional LAN port
– For additional LAN port
Card type: PCI Express 2.0
(x8)
– For additional LAN port
– For additional LAN port.
Prepare SFP+ module
N8104-129 if needed.
 For Infiniband connection
Up to two cards can be
mounted.

Cannot be used together
with each other.
– For additional serial port B
(RS-232C)