NEC Express5800 Series User Manual page 32

Chapter 1 General Description
(1) Processor (CPU) Socket
-1: Processor #1 (CPU #1)
-2: Processor #2 (CPU #2)
(2) DIMM Socket
(3) Front Panel Connector
(4) Fan Connector
(5) Power Connector for Fan Unit
(6) Power Connector for SATA Optical Disk Drive
(7) Power Connector for HDD BP
(8) Power Connector
-1: Standard power unit (POW #1)
-2: Optional power unit (POW #2)
(9) LOM Card Connector
(10) Lithium Battery
(11) Unused Connector
(12) Clear Password Jumper Switch
(13) Clear CMOS Jumper Switch
(14) SW-RAID Jumper Switch
(15) USB Memory Module Connector
(16) Front Video Connector
(17) Connector for Optional COM
Connect an additional RS-232C connector kit N8117-01A
to use this port as a serial port.
32
(18) SPI Mezzanine Connector
EXPRESSSCOPE Profile Key (SPI memory) has been
installed, where BIOS and BMC configuration data is
stored. Relocate it when replacing motherboard to inherit
configuration data.
(19) Unused Connector
(20) TPM Kit Connector
(21) SATA Connector (for optical disk drive)
(22) PCI Riser Card Connector (for low profile card)
For the supported card specifications, see Chapter 2 (1.12
PCI card).
(23) PCI Riser Card Connector (for full height card)
For the supported card specifications, see Chapter 2 (1.12
PCI card).
(24) SATA HDD Connector
(25) Connectors for External Devices (See page 27)
(26) RAID Controller Connector
(27) USB Connector (front)
Express5800/R120f-1E User's Guide
4. Names and Functions of Parts