Led On A Hard Disk Drive - NEC Express5800 Series User Manual

Chapter 1 General Description

LED on a hard disk drive

4.7.7
Each HDD is equipped with DISK LED.
DISK LED 1, 2 pattern
DISK LED 1
Flashing (green) Off
Off On (amber)
(only when RAID
system is
configured)
Flashing (green) Flashing (amber )
(only when RAID
system is
configured)
Off Off
36
DISK LED 1 (green)
DISK LED 2
Hard disk drive is being accessed.
Hard disk drive is failing.
Rebuild is in progress.
When the failed hard disk drive is replaced,
rebuild process starts automatically (auto
rebuild feature).
Hard disk drive is halted.
Important Observe the following precautions whenever you use the auto rebuild
feature.
• Do not turn off or reboot the server while a HDD is being rebuilt.
• Wait at least 90 seconds before installing a HDD after removing one.
• Do not replace a HDD while another HDD is being rebuilt.
Express5800/R120f-1E User's Guide
DISK LED 2 (amber)
Description
Contact your sales representative.
4. Names and Functions of Parts
Solution
–
–
–