Table of Contents
Advertisement
Falcon XT Computer Interface Requirements
The following items are required for the operation of the access system controller.
•
StorLogix™ software, version 4.1 or newer
•
Ethernet, USB, or RS232 connection
-
Ethernet Cable Connection — maximum length 328 feet (100m)
-
USB Connection — If connecting using USB, the supplied USB isolator MUST be used
as it includes circuit protection. Failure to use this isolator will void your warranty. —
maximum length 16 feet (4.5m)
-
RS232 Cable Connection — maximum length 50 feet (15m)
•
Electrical outlet providing 120VAC (United States) or 240VAC (Europe or Australia)
Proximity Cards / Photo ID Badges / Swipe Cards
The following items are recommended for the operation of peripheral devices.
•
Compatible Wiegand interface cards for proximity devices
•
Any 4-line magnetic stripe card for use with swipe reader devices
Site Graphics™ Additional Requirements (optional)
If you have purchased the Site Graphics™ software the computer running the software must
include these computer requirements as well as those previously listed.
•
PTI Graphics Serial Adapter (Part # PGRASIA)
•
16 MB Video Card or higher
•
1024 x 768 resolution minimum (Large screen monitor recommended)
114A3866.D Revised 7-2017
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Falcon XT and is the answer not in the manual?
Questions and answers