PTI security systems Falcon XT Installation Manual page 45

Hide thumbs Also See for Falcon XT:
Table of Contents

Advertisement

Appendix
Site Closeout Checklist (cont'd)
Door Alarm System:
… Open and close every alarmed door on-site in sequential order.
and can be performed ahead of time and proven by the next step below.
… Print a
'Site Activity by Date'
sequential order with no mistakes. This cannot be faked in the system and will demonstrate that all
doors are correctly working. Attach a current copy of this report.
… Verify that when a door is opened without entering a code, the siren sounds for the correct time.
… Verify that when a door is opened without entering a code, the siren is stopped and every door
returns to alarmed normal status when alarms are cleared in the control software.
Intercom System:
… Verify that each keypad call button works to call the intercom base station.
… Verify that each keypad can receive a call from the intercom base station.
… Verify that the volume is sufficient at each keypad and base station.
… Verify that any other remote intercom call stations send and receive calls.
… Verify each remote intercom call station location is correctly labeled at the intercom base station.
… Verify that there is no static, buzzing, or sound bleed at each keypad and intercom station.
… Verify that all call functions work throughout the site.
… Verify that music can be heard at each location (NEM only).
… Verify that radio is receiving stations (NEM only).
Site Graphics™ (may not be installed):
… Verify every door correctly shows open and closed on the graphics (verify with door test above).
… Verify all screen control functions work through the mouse, control panel, or wireless remote.
… Verify the panning path and screen resolution allow the entire site to be viewed while running.
… Verify that the graphics update correctly.
… Verify that the site graphics and layout are correct.
Gate System:
… Verify that the manual override control switch in the office opens the gate.
… Verify that all gate safety equipment is working correctly and actually stops the gate (loops, beams,
photo eyes, millers edge, etc.).
41
report for today's date showing each door opening and closing in
this step is very important
Initials: _____ _____
114A3866.D Revised 7-2017

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Falcon XT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Products for PTI security systems Falcon XT

Table of Contents

Save PDF