Raymarine SeaTalk Owner's Handbook Manual page 25

81073_6.book Page 13 Thursday, March 2, 2006 2:39 PM
Chapter 4: Setup
6. Assign a Remote Keypad to the required group as follows:
i. Use the
ii. Press the
iii. At the Remote Keypad, press either the
7. If you are creating more than one group, repeat the procedures described in
steps 2 to 6.
8. When all groups have been defined and all Remote Keypads allocated, simul-
taneously press the
mode, then simultaneously press the
to return to normal operation.
or key to select any instrument in the required group.
and keys together for 1 second. The message PRESS A
KEY ON THE KEYPAD FOR THIS GROUP is displayed.
Remote Keypad to the selected instrument group.
and
or the key, to assign the
keys for 1 second, to return to group setup
and keys for a further 2 seconds
13