Introduction - Raymarine SeaTalk Owner's Handbook Manual

81073_6.book Page v Thursday, March 2, 2006 2:39 PM
SeaTalk Remote Keypad Owner's Handbook

Introduction

The SeaTalk Remote Keypad enables you to remotely operate the following
instruments on a SeaTalk system:
• Standard (110 mm x 110 mm) ST60 instruments.
• Standard and MaxiView ST80 instruments.
The Remote Keypad has:
• A group of six keys, used to control standard instruments.
• A group of four keys, used to control ST80 MaxiView instruments.
Instruments can be organized in groups, up to a maximum of eight groups each of
eight instruments, to allow specified groups to be operated from different Remote
Keypads (see Chapter 4, Setup). For optimum system flexibility, you can also use
more than one Remote Keypads to operate any group of instruments. Typical
ways of using instrument groups are shown in the following illustration.
Controls
for MaxiView
instruments
Controls
for standard
instruments
SeaTalk Remote Keypad
D1945-6