Chapter 2: Maintenance & Fault Finding; Maintenance; Servicing And Safety; Cabling - Raymarine SeaTalk Owner's Handbook Manual

81073_6.book Page 1 Thursday, March 2, 2006 2:39 PM
Chapter 2: Maintenance & Fault Finding
Chapter 2: Maintenance & Fault Finding

2.1 Maintenance

All Raymarine equipment and accessories are designed to the best industry
standards for use in the leisure marine environment.

Servicing and safety

• Raymarine equipment should be serviced only by authorised Raymarine ser-
vice engineers. They will ensure that service procedures and replacement
parts used will not affect performance. There are no user serviceable parts in
any Raymarine product.
• Some products generate high voltages, and so never handle the cables/con-
nectors when power is being supplied to the equipment.
• Always report any EMC related problem to your nearest Raymarine dealer. We
will use any such information to improve our quality standards.

Cabling

Periodically examine all cables for chafing or other damage to the outer shield.
When necessary, replace and secure damaged cables.

Assistance

For advice or further information regarding this product, please contact the
Raymarine Product Support Department or your own National Distributor.

2.2 Fault finding

All Raymarine products are subjected to a comprehensive test procedure prior to
packing and shipping. In the unlikely event that a fault does occur with your
Remote Keypad, use the following check list to help identify and rectify the
problem.

Keypad does not operate

• Make sure the cable connecting the keypad to SeaTalk is connected properly.
• Make sure the cable is not damaged. Replace the cable if it is damaged.

Instruments do not operate in a logical sequence

• Instruments and keypad are not grouped. Refer to Chapter 4, Setup chapter
for grouping details.
1