Raymarine SeaTalk Quick Reference Manual

SeaTalk Remote Keypad Quick Reference Guide

Introduction

This Quick Reference Guide gives summary information on your SeaTalk
Remote Keypad. For comprehensive instructions, refer to the SeaTalk
Remote Keypad Owner's Handbook.

Basic operation

The SeaTalk Remote Keypad enables you to remotely operate the following
instruments on a SeaTalk system:
• Standard (110 mm x 110 mm) ST60 instruments.
• Standard and MaxiView ST80 instruments.
The Remote Keypad has:
• A group of six keys, used to control standard instruments.
• A group of four keys, used to control ST80 MaxiView instruments

Key functions for normal operation

Remote indicators

When the
associated instrument group is selected in turn, on successive key presses. As
each instrument is selected, it displays a remote indication, during which time
you can control it from the Remote Keypad.
86015_3.p65
The following illustration shows the functions assigned to each key or key
sequence.
or key is pressed, each individual instrument in the
1
Select required ST80 MaxiView
Cycle chapters on selected ST80 MaxiView
Cycle pages in selected ST80 MaxiView chapter
Select required standard instrument
These four keys duplicate the functions
of the respective keys on the selected
standard instrument.
10/04/01, 16:02
D2353-3