Check Before Going To Sea - Raymarine SeaTalk Owner's Handbook Manual

81073_6.book Page 7 Thursday, March 2, 2006 2:39 PM
Chapter 3: Installation
Masterview
Autopilot connections
• If you require extension cables, please refer to the display head installation
chapter for a list of options.

3.3 Check before going to sea

EMC conformance
• Always check the installation before going to sea to make sure that it is not
affected by radio transmissions, engine starting etc.
• In some installations, it may not be possible to prevent the equipment from
being affected by external influences. In general this will not damage the
equipment but can lead to it resetting, or momentarily may result in faulty
operation.
Autopilot Keypad
3-Way SeaTalk
Connector Block
Active Compass
SeaTalk
Course Computer
D2423-2
7