Modifying Videoplus+/Showview Programming; Nicam - Samsung SV-5000W Owner's Instructions Manual

Modifying VIDEOPLUS+/SHOWVIEW Programming

GB
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press MENU a second time to confirm.
If you wish to...
Select an input source other
than the tuner (L1, L2, AV input)
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
Select the VPS/PDC recording
28
Then...
Press the or buttons, until the PR selection flashes.
Press the INPUT button one or more times to change the
input source selection.
Result: The programme number is replaced by:
The input source must be selected before changing any other
value.
Press the or buttons, until the DAY selection flashes.
Press the or buttons, until the DLY (Daily) value is
displayed.
Press the or buttons, until the DAY selection flashes.
Press the or buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Press the or buttons, until the STOP selection flashes.
Press the or buttons to increase or decrease the stop
time.
Press the or buttons, until the recording speed selection
flashes.
Press the or buttons until the correct indication is
displayed:
•
AUTO (Auto Tape Speed Select)
• SP (Standard Play)
• LP (Long Play)
•
SLP (Super Long Play)
Press the or buttons, until the V/P selection flashes.
Press the or buttons until the "ON" indication is
display.
Do not select VPS/PDC unless you are sure the programme
you wish to record is broadcast with VPS/PDC. If you do set
VPS/PDC ON (by selecting "ON" in the right - hand column on
the screen), then you must set up the start-time EXACTLY
according to the published TV schedule. Otherwise the timer
recording won't take place.

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding or buttons, until the cursor is
placed in front of the USER SET option.
3 Press the button to select user set2 page.
,
Result: The USER SET2 menu is displayed.
4
Press the corresponding or buttons, until the cursor is
placed in front of the NICAM option.
5
To... Press or , until...
Mono mode OFF is displayed.
OFF: Only set at this position to record
the standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
6 On completion, press MENU twice to exit the menu.
NICAM is the stereo broadcast system of some countries.
(Ex.: U.K., SPAIN, --)
If the stereo broadcast system of your country is not
NICAM, the SV-5000W can not receive NICAM.
GB
** USER SET1 **
TAPE SELECT :E180/
T120
CLOCK TYPE :24H
PLAY SYSTEM :AUTO
OSD :ON
❿ USER SET2
❿
# ❷ END:(MENU)
** USER SET2 **
❿ NICAM :ON
COLOR :ON
BLUE SCREEN :ON
SQPB :OFF
USER SET1
❿
END:(MENU)
# ❷
29