Using The Showview Feature; Modifying Showview Programming - Samsung SV-647F Instruction Manual

Using the ShowView Feature

Before presetting your VCR:
Switch on both the television and your VCR
Check that the date and time are correct
Insert the cassette on which the programme is to be
VITESSE DUB TV/VCR PROG.
recorded (safety tab intact)
Up to six programmes can be preset.
1
1 Press the PROG. button.
Result:
2
Press the corresponding
option is selected.
** OPTIONS PROG. **
3 Press the ❿!button to select
NORMALE
Result:
SHOWVIEW
If all six programmes have been set, the message
LES PROGRAMMES SONT UTILISÉS
to page 27 if you wish to cancel a preset recording.
❿
FIN: MENU
$ ❷
4 Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
If you wish to correct the ShowView code that you are
SHOWVIEW entering:
CODE ---------
5 Press the MENU button.
CODE:0-9 CORRIGER: ➛
Result:
FIN:MENU
When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
1/JAN LUN 21:28
PROG
ST JOUR DÉBUT→FIN V/P
1 LU 1 12:00→12:50 P
STD
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
6 If the programme and times are correct, press the MENU button.
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
-- ---- --:--→--:---- -
7
Press the M.A./VCR. button to activate the timer. If you wish to
➛❿
$ ❷
turn the timer off any reason simply press the M.A./VCR. button
EFFACE:ANNUL./RàZ MENU
again.
8
Refer to page 27 if you wish to:
Check that your VCR has been programmed correctly
Cancel a preset recording
The numbers next to each TV programme listing are
ShowView code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the ShowView code for the programme
you wish to record.
™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is
manufactured under licence from Gemstar Development Corporation.
24
The OPTIONS PROG. is displayed.
or buttons, until the SHOWVIEW
$ ❷
SHOWVIEW .
A message is displayed to allow you to enter the
ShowView code.
TOUS
. is displayed. Refer
Press the ➛ button until the digit to be corrected is
cleared
Enter the correct digit
The information concerning the programme is displayed.
or buttons. Refer to the following page if:
$ ❷
The programme number or times flash
You wish to modify the programme

Modifying ShowView Programming

If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to... Then...
Press the ➛ or ❿ buttons, until the
Select an input source other
than the tuner (AV1, AV2 or AUX) Press the ENTRÉE button one or more times to change the
input source selection.
Result:
The input source must be selected before changing any
other value.
Record a programme every day Press the ➛ or ❿ buttons, until the
(Monday to Sunday) at the same time Press the
displayed.
Record a programme every week Press the ➛ or ❿ buttons, until the
on the same day and at the same time Press the
displayed, followed by the required day.
Example:
Press the ➛ or ❿ buttons, until the
Extend the recording time
Press the
time.
Select the recording speed Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
Press the
displayed:
•
AUTO (Auto Tape Speed Select) : see page 26
•
STD (Standard Play)
•
DBL (Long Play)
Press the ➛ or ❿ buttons, until the
Select VPS/PDC recording
Press the
displayed.
Do not select VPS/PDC unless you are sure the programme
you wish to record is broadcast with VPS/PDC. If you do set
VPS/PDC ON (by selecting "P" in the right - hand column
on the screen), then you must set up the start-time
EXACTLY according to the published TV schedule.
Otherwise the timer recording won't take place.
Preset a programme title Press OK during the timer programming procedure or in the
timer programming screen.
Press the
To move to the next or previous character, press the ➛ or ❿
buttons respectivly.
If you wish to store the title, press OK.
ST selection flashes.
The programme number is replaced by:
•
A1, A2 or AU for a satellite tuner or external
video input (used by another VCR for example)
selection flashes.
JOUR
or buttons, until the (Daily) value is
JOUR
$ ❷
selection flashes.
JOUR
or buttons, until the (Week) value is
S-
$ ❷
S-SA (Weekly Saturday)
FIN selection flashes.
or buttons to increase or decrease the stop
$ ❷
or buttons until the correct indication is
$ ❷
V/P selection flashes.
or buttons until the "P" or "-" indication is
$ ❷
or buttons to select a character.
$ ❷
25
GB