(AC43-12002H) Your Owner’s Instructions contain much valuable information on setting up and using your VCR. Please take the time to read them as they will help you take full advantage of the VCR’s features. Do NOT expose the VCR to The manual is organized as follows: any liquids.
SV-5000W/SEA1 7/10/02 2:48 PM Page 6 Front View of the VCR VIDEO CASSETTE COMPARTMENT RECORD RESET POWER BUTTON BUTTON BUTTON EJECT BUTTON RCA VIDEO RCA AUDIO CHANNEL INPUT JACK L,R INPUT BUTTONS JACKS Rear View of the VCR RCA AUDIO...
Worldwide Broadcasting system is B/G, I, D/K, M, N, L. Multi-System VCR vs Worldwide VCR The Worldwide VCR is similar to the Multi-System VCR in that it will play back tapes recorded in any TV Broadcasting System. However, there are a few key differences:...
MESECAM Tape Conversion with the Worldwide VCR One of the most useful functions of the Worldwide VCR is the combination of tape duplication and system conversion, more simply known as “Tape Conversion”. This allows the user to copy, for example, a SECAM tape and simultaneously convert it to PAL or NTSC. This is particularly useful for duplicating home video camcorder recordings and sending them to friends or relatives abroad.
Rear Worldwide VCR IN FROM ANT. Rear Whenever you connect an audio or video system to your VCR, ensure that all units are switched off. Any VHS Tape Refer to the documentation supplied with your equipment for detailed connection instructions NTSC and associated safety precautions.
Regardless of the type of connection chosen, you must always connect the coaxial cable supplied. Otherwise, no LINE 2 IN R - AUDIO - L VIDEO picture will be visible on the screen when the VCR is switched off. AUDIO EURO AV * NOTICE:...
To turn On-Screen Information on/off to select the USER SET2. Your VCR displays most information both on the VCR and television. to select the USER SET2 menu item. You can choose to turn this information on/off the television screen (except for the Index, Timer Programming function, Picture, which cannot be turned off).
Page 18 Setting the VCR RF out System The VCR RF out system and channel is used to connect the SV-5000W to a TV with RF coaxial jacks. The RF out system is automatically set by country selection (See page 15).
7/10/02 2:53 PM Page 20 Presetting the Stations Automatically Your VCR contains a built-in tuner used to receive television broadcasts. It can also receive cable television broadcasts. You must preset the stations received through the tuner. This can be done: automatically ;...
If the VCR is left in pause mode for more than ten minutes, recording will be stopped automatically to protect the heads and the cassette. CLR/RST The VCR is switched on automatically.
This function enables you to record up to nine hours of programs. Your VCR stops automatically after the preset length of time. Switch on the television. Select the AV input on the television for use with your VCR. Insert the cassette on which the program is to be recorded. Result: The VCR is switched on automatically.
7/10/02 2:53 PM Page 26 VCR Plus+ Recording (AMERICA Only) VCR Plus+ selects programs to be recorded with a Plus Code number, usually found in most of the program listings. Before using VCR Plus+, you must set up your Guide Channel.
SV-5000W/SEA3 7/10/02 2:58 PM Page 28 Checking a Preset Recording You can check your preset recordings: when you have finished presetting the VCR ; or if you have forgotten which programs will be recorded. REC.SPEED CLK/COUNT PICTURE TIMER STROBE AUDIO Press the TIMER button and select STANDARD TIMER.
It can also be set to record the secondary audio program (SAP) of any broadcast with second language audio. STEREO The VCR records the same audio on both the Hi-Fi linear tracks on the tape. Press AUDIO button on the remote control to select stereo.
The cassette is rewound automatically when the end of the tape is reached. If you press POWER while a cassette is being rewound, the VCR switches off automatically when the beginning of the cassette is reached. Description Playing a Cassette in Slow Motion You can play a cassette in slow motion.
To return to normal playback, press the PLAY ( If the Frame-by-Frame function is used for more than five minutes (except for JOG function), the VCR will auto- matically play to protect the cassette and video heads. Playing a Sequence at Variable Speeds You can vary the playback speed using the Shuttle function (up to nine times the normal speed).
7/10/02 3:00 PM Page 36 Searching for a Specific Sequence Each time you record a cassette on this VCR, an “index” is automatically marked on the tape when recording starts. POWER The Search function enables you to fast-forward or rewind to a specific index and start playback from that point.
SYSTEM Connecting Other Equipment to Your VCR You can connect other audio and/or video equipment to your VCR in different ways. The following illustrations give a few examples of the connection possibilities. The LINE 1 input connectors on the front of the VCR are used to input signals from equipment such as camcorders, VCRs or stereo sound ) to start playback.
7/10/02 3:00 PM Page 40 Recording from Another VCR or Camcorder You can copy a cassette on your Samsung VCR from another video source such as another VCR or a camcorder. It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.
PAL system. Result: The display panel shows PAL. Press the PLAY button of the other VCR. Press the REC button of the Samsung VCR at least one second. STROBE AUDIO Result: appears on the display panel, and recording begins.
To provide true Hi-Fi audio sound with video entertainment and, at the same time, compatibility with regular VHS tapes, your VCR employs a newly-developed audio recording system. Hi-Fi audio signals (2-channel) are recorded deep into the tape's magnetic coating and the video signal is recorded on top of the audio signals in a shallower layer.
The FM Simulcast feature enables you to record: the picture received on the VCR’s tuner ; the sound received from an external source via the LINE 1 RCA input connectors on the front of the VCR. Example: You wish to record a concert transmitted simultaneously on television and radio to take advantage of FM stereo sound.
Result: The lock indicator (LOCK) is displayed. If a cassette is in the VCR when you lock it, the cassette will be ejected. To unlock the VCR, hold down the P/STILL ( ) button again for approximately five seconds.
Frequency assigned to a given broadcasting company to enable them to transmit a series of broadcasts or programs. Number assigned to a given channel on the tuner in the VCR to help you select it more easily. Broadcast transmitted on a given channel.
Burundi Web site : http://www.samsungcanada.com Mauritania Djibouti Saudi- French Guiana Mexico Arabia Gabor Tel : 52-5-686-0800 Tunisia Guadeloupe Web site : http://www.samsung-latin-america.co Guinea Panama Guinea-Bissau Tel : 507-210-1133 Guiana Web site : http://www.samsung-latin-america.co Hungary Brazil Ivory Coast Tel : 55-11-541-8500 Madagascar Web site : http://www.samsung-latin-america.co...
Page 28
SV-5000W/SEA5 7/10/02 3:01 PM Page 52 ELECTRONICS SAMSUNG ELECTRONICS AMERICA, INC 105 CHALLENGER ROAD RIDGEFIELD PARK N.J 07660-0511, U.S.A “FOR YOUR NEAREST SAMSUNG AUTHORIZED SERVICE CENTER DIAL 1-800-SAMSUNG” www.samsungvcr.com AC68-00401A...