Recording A Programme Immediately; Stopping A Recording Temporarily; Recording A Programme With Automatic Stop - Samsung SV-5000W Owner's Instructions Manual

Recording a Programme Immediately

GB
Before recording a programme, you must have preset the corres-
3
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
ART INPUT
5 6
1
CH
4
9
8
2
CLR/RST
0
4
3
4
5
DEX REC.SPEED CLK/COUNT PICTURE TIMER
STROBE AUDIO
1 2 3
ART INPUT
5
6
REC P/STILL
STOP
7
DISPLAY MONITOR A.DUB
6
7

Stopping a Recording Temporarily

You can stop recording temporarily (pause mode), to avoid
recording TV spots or to change channels for example.
REC P/STILL
STOP
To:
DISPLAY MONITOR A.DUB stop recording temporarily
start recording again
24
Switch on the television.
To monitor the programme being recorded, select the television
AV input.
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The VCR is switched on automatically.
Select:
the station to be recorded using the CH ( or ) buttons ;
or
the AV source using the INPUT button for a satellite tuner or
external video source.
Result: The channel number is displayed and the programme
can be seen on the television.
Select the recording speed by pressing the REC.SPEED button as
many times as required (see page 23).
Press the REC button for at least one second to start recording.
Result: The record indicator appears on the television and VCR
display. An index is recorded on the tape (see page 37).
To stop recording, press STOP ( ) once.
If the cassette is ejected when you start recording,
check that the safety tab is intact or the opening is
covered with adhesive tape.
If you reach the end of the tape while recording, the
cassette rewinds automatically.
press:
P/STILL ( ).
P/STILL ( ) or REC.
If the VCR is left in pause mode for more than five
minutes, recording will be stopped automatically to
protect the heads and the cassette.

Recording a Programme with Automatic Stop

This function enables you to record up to nine hours of
programmes.
Your VCR stops automatically after the requested length of time.
1 Switch on the television.
2
Select the AV input on the television for use with your VCR.
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The VCR is switched on automatically.
4 Select:
the station to be recorded using the CH (
or
the AV source using the INPUT button for a satellite tuner or
external video source
Result: The channel number is displayed and the programme
can be seen on the television.
5
Select the recording speed by pressing the REC.SPEED button as
many times as required (see page 23).
6
Press the REC button to start recording.
Result: The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 37).
7
Press the REC button several times to increase the recording time
in:
30-minute intervals up to four hours ; or
1-hour intervals up to nine hours.
Result: The length is displayed on the VCR and television
VPS PDC
INPUT OUTPUT
displays. The selected programme is recorded for the
CONVERSION
SLP VCR
length of time requested. At the end of that time, the
AUTO THROUGH
VCR stops recording automatically.
NTSC4.43 NTSC4.43
PAL-MN 8 STROBE PAL-MN
If you wish to cancel the recording before the end, press
STANDBY/ON.
MESECAM ART MESECAM
If the end of the tape is reached while recording:
the recording stops ; and
the VCR automatically turns off.
OUTPUT SYSTEM
THROUGH
/I STANDBY/ON EJECT REC
NTSC REW
RESET
PAL
LINE 1 IN
VIDEO L AUDIO R SECAM
CHANNEL
PAL-M
P/S
PAL-N
INDEX REC.SPEED CLK/COUNT PICTURE TIMER
STROBE AUDIO
5
1 2 3
or ) buttons ;
ART INPUT
4 5 6
4
CH
7 8 9
100 CLR/RST
0
4
REC
STOP
6
DISPLAY MONITOR A.DUB
INPUT
SQPB DTR INDEX INDEX DUB DUB Hi-Fi Hi-F
25
GB
F.F
STOP
P/ST
OUTPU
+10
+5
0
-10
-20
-30
-40
L
R