Table of Contents
Advertisement
Modifying ShowView Programming (SV-645X/SV-445G/SV-245G Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to...
Then...
Select an input source other
Press the ➛ or ❿ buttons, until the
than the tuner AV1, AV2 or AUX
Press the INPUT button one or more times to change the
input source selection.
Result: The programme number is replaced by:
The input source must be selected before changing any
other value.
Press the ➛ or ❿ buttons, until the
Record a programme every day
(Monday to Sunday) at the same time
Press the
displayed.
Press the ➛ or ❿ buttons, until the
Record a programme every week
on the same day and at the same time
Press the
displayed, followed by the required day.
Example:
Press the ➛ or ❿ buttons, until the
Extend the recording time
Press the
time.
Press the ➛ or ❿ buttons, until the
Select VPS recording
Press the
displayed.
Do not select VPS unless you are sure the programme you
wish to record is broadcast with VPS. If you do set VPS ON
(by selecting "ON" in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won't take place.
Press the ➛ or ❿ buttons, until the recording speed selection
Select the recording speed
(SV-645X/SV-445G only)
flashes.
Press the
displayed:
• AUTO
• SP
(Standard Play)
• LP
(Long Play)
28
PR
selection flashes.
•
A1, A2 or AU for a satellite tuner or external
video input (used by another VCR for example)
DAY
selection flashes.
or
buttons, until the
DLY
(Daily) value is
"
❷
DAY
selection flashes.
or
buttons, until the
W-
(Week) value is
"
❷
W-SA
(Weekly Saturday)
STOP
selection flashes.
or
buttons to increase or decrease the stop
"
❷
V/P
selection flashes.
or
buttons until the ON or "-" indication is
"
❷
or
buttons until the correct indication is
"
❷
(Auto Tape Speed Select) : see page 29
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the VCR to
record a programme up to one month before that programme is to
be broadcast. Up to six programmes can be preset.
Before presetting a recording, check that the date and
time are correct.
1
- Insert the cassette. Press the TIMER button.
Press the
or
buttons to select the
STANDARD
"
❷
then press the ❿!button or,
Press MENU on the remote control.
Result:
The programming menu is displayed.
Press the OK button to select
TIMER PROGRAMMING
Result:
The
TIMER PROGRAMMING
menu is displayed.
2
Press ❿!!to select the input source.
3
Select the required station by pressing the
,
buttons or
"
❷
INPUT to select the AV1, AV2 or AUX (SV-645X/SV-641X/
SV-445G/ SV-245G only) input sources.
4
Press ❿!!to select the recording day.
5
Select the required day by pressing the
or
buttons.
"
❷
6
Press ❿!!to select the recording start time.
7
Select the required hour value by pressing the
or
"
8
Press ❿!!to select the minutes.
9
Select the required minute value by pressing the
"
10
Press ❿!!to select the recording end time.
11
Select the required recording end time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
With SV-645X/SV-641X/SV-445G/SV-441G, you can select the
recording speed.
a. Press ❿ to select the the recording speed (AUTO/SP/LP).
b. Press the
or
buttons to switch between the
"
❷
(Standard Play) or
LP
(Long Play).
With SV-645X/SV-641X you can select the VPS or PDC recording
mode.
a. Press ❿ to select the VPS or PDC(V/P) recording mode.
b.Press the
or
buttons to toggle between the VPS or PDC
"
❷
mode (marked
ON
) and the non-VPS/PDC mode (marked
12
When you have finished, press the MENU button.
13
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer.
Result:
Before starting recording, the VCR compares the timer
duration with the remaining time on the cassette.
Auto Tape Speed Select
(SV-645X/SV-641X/SV-445G/SV-441G Only)
The VCR's "Auto Tape Speed Select" function compares
the duration of the timer recording to the actual recording
time remaining on the tape loaded. If there is insufficient
tape to complete a timer recording in AUTO mode, the
VCR automatically switches to LP mode to record the
whole programme.
E.g.
If there is a one hour Timer Recording in AUTO
mode to be started, and only 40 minutes tape
remaining, the VCR will record in SP for 20
minutes and switch to complete the remaining 40
minutes in LP mode.
(SV-645X/SV-445G/SV-245G)
** TIMER METHOD **
STANDARD
SHOWVIEW
option and
❿
END:
MENU
" ❷
option.
(SV-645X/SV-641X)
1/JAN MON
21:28
PROG
PR DAY
START STOP
V/P
1 MO 1 12:00 12:50SP ON
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
-- ---- --:-- --:---- -
➛❿
buttons.
" ❷
❷
DELETE:CLR/RST
MENU
or
buttons.
❷
(SV-445G/SV-441G)
or
"
❷!
1/JAN MON
21:28
PROG
PR DAY
START STOP
1 MO 1 12:00 12:50SP
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
AUTO
,
SP
-- ---- --:-- --:----
-- ---- --:-- --:----
➛❿
" ❷
DELETE:CLR/RST
MENU
(SV-245G/SV-241G)
-
).
1/JAN MON
21:28
PROG
PR DAY
START STOP
1 MO 1 12:00 12:50
-- ---- --:-- --:--
-- ---- --:-- --:--
-- ---- --:-- --:--
-- ---- --:-- --:--
-- ---- --:-- --:--
➛❿
" ❷
DELETE:CLR/RST
MENU
29
GB
Hide quick links:
Advertisement
Table of Contents
