Connecting Other Equipment To Your Vcr; Connecting An Rca Audio/Video Input Cable - Samsung SV-5000W Owner's Instructions Manual

Connecting Other Equipment to Your VCR

B
You can connect other audio and/or video equipment to your VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
The LINE 1 input connectors on the front of the VCR are used for
equipment such as camcorders, VCRs or stereo sound systems.
LINE 1 IN
VIDEO AUDIO
L R
FRONT OF THE VCR
The RCA output connectors (OUT1 or OUT2) on the rear of the VCR
are used for equipment such as a stereo sound system.
LINE 2 IN
R - AUDIO - L VIDEO
OUT 2 OUT 1
R
AUDIO
EURO AV
L
VIDEO
REAR OF THE VCR
The EURO AV connector on the rear of the VCR is used for equipment
with a SCART input/output such as a satellite tuner or VCR.
LINE 2 IN
R - AUDIO - L VIDEO
2 1
OUT OUT
R
AUDIO
EURO AV
L
VIDEO
REAR OF THE VCR
40
Camcorder
VCR
Stereo sound system
Stereo sound system
Satellite tuner
or
VCR

Connecting an RCA Audio/Video Input Cable

You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
equipment chosen.
Examples: You wish to copy a video cassette with the help of a
second VCR (see page 42).
You wish to play back and/or copy pictures taken
with a camcorder (see page 42).
You wish to dub a prerecorded video cassette with
sound from a stereo system (see page 46).
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
Make sure that both the television and the VCR are
switched off before connecting the cables.
1 Connect one end of the RCA audio/video cable into the VIDEO
INPUT jack on the front of the VCR.
2 Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT jacks on the front of the VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
GB
LINE 1 IN
VIDEO AUDIO
L R
1
LINE 1 IN
VIDEO AUDIO
L R
3
3
41