Modifying G-Code Programming (Sv-675/Sv-275 Only) - Samsung SV-270 Instruction Manual

Modifying G-CODE Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording speed, you can do so
before you press MENU a second time to confirm.
If you wish to...
Select an input source other
than the tuner LINE IN 1 or LINE IN 2 input
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
(SV-675/SV-275 Only)
Then...
Press the ➛ or ❿ buttons, until the PR selection flashes.
Press the INPUT button one or more times to change the
input source selection.
The input source must be selected before changing any
other value.
Press the ➛ or ❿ buttons, until the DAY selection flashes.
Press the or buttons, until the DLY (Daily) value is
❷
displayed.
Press the ➛ or ❿ buttons, until the DAY selection flashes.
Press the or buttons, until the W- (Week) value is
❷
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Press the ➛ or ❿ buttons, until the STOP selection flashes.
Press the or buttons to increase or decrease the stop
❷
time.
Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
Press the or buttons until the correct indication is
❷
displayed:
• AUTO (Auto Tape Speed Select) : see page 20
• SP (Standard Play)
• LP (Long Play)
ENG-19