You can convert recording from signal recorded on the original
tape to different signal.
LINE 1 IN
Connect the RCA Audio/Video cable to input on the front of the
main VCR (SV-5000W)
Insert the tape to record.
Connect the other end of the RCA Audio/Video cable to output
connectors of another sub VCR (see page 40).
If you wish to convert from NTSC system signal recorded tape to
PAL system signal, then insert the playback tape recorded NTSC
AUDIO OUT (R)
system signal into the sub VCR, which can playback NTSC
AUDIO OUT (L)
Press the INPUT button on the remote control to select the L1
Press the PAL output button on the front panel to select the PAL
Press the PLAY button of the sub VCR.
Press the REC button of the main VCR.
The display panel shows L1.
The display panel shows the output system selects
appears on the display panel, and recording starts.