Accessory Settings - Chuango H4 PLUS User Manual

Notifications
(1) You can select an alarm tone and set up email alerts on this page.
(2) Store phone numbers for SMS texts and phone calls
The stored phone numbers (up to 5 numbers) will receive SMS and phone calls in case
of triggered alarms.
The Hub will make phone calls to the stored phone numbers successively (up to 3
rounds in turn). If the phone call is answered and any keypad command has been
operated by one of these users, it will stop calling the next phone number; otherwise it
will continue to remind users until it is up to 3 rounds.
Keypad Commands
Phone
Function
Button
0 Arm
1 Disarm
# Hang Up
6 Turn Off Siren
9 Turn On Siren
* Two-Way Talk
Note: App alert notifications will be sent firstly, and then SMS and phone calls will follow
immediately.
(3) Enable email notification for alarm alerts.
23

Accessory Settings

Add, delete, rename and change the zone mode of each sensor.
Pairing New Accessories
Tap on [+] at the top left on the accessory settings page or press the pairing button on
the hub once, and then trigger the accessory.
Press any button on the remote
control
Separate the transmitter from the
magnet by at least 2 cm
Place the PIR motion detector in a
high position and then walk within
the detection area to trigger the
PIR alarm once (the indicator light
flashes once).
24