How The Alarm System Works; Getting To Know Your System - Chuango H4 PLUS User Manual

How the Alarm System Works

Arm the system
using the remote
control or the App.
The Hub is set to Arm
Mode (The red Status
Indicator is on) .
03
The Hub receives the
command and enters
"Armed" mode.
When a Door/Window
Sensor detects a door/
window opening, the sensor
sends a signal to the Hub
letting the Hub know there
has been an intrusion.
The Hub sounds at 93dB
on-site.
The Hub sends a push notification
and text message to your phone.
You will also receive an email
when a sensor is triggered if you
enable the notification function
located in your app settings. After
that the hub will also make phone
calls to each pre-set phone
numbers.

Getting to Know Your System

This is a dual network system that utilizes both WiFi and GRPS. When the WiFi is
in use, the GRPS network will be in standby status (make sure the GPRS function is
activated from "Settings"- "My Hub"-"GPRS") ,In the event of AC power loss or WiFi
disconnection, the GRPS network will be implemented until power or WiFi connection
is reestablished.
All sensors are wirelessly linked to the hub. In the event of alarm activation, for
example, when a sensor is triggered, a push notification will automatically be sent and
an alarm call will be made to all registered users.
The system can be controlled and monitored both on-site by using the remote control
supplied or remotely from anywhere in the world with our free dedicated mobile
application.
The system can be expanded to include up to 50 wireless sensors and 10 remote
controls.
04