Remote Control; Door/Window Sensor - Chuango H4 PLUS User Manual

Remote Control

LED Indicator
Arm Button
Home Arm Button
Description of Indicator Light
Buttons
All sensors will be armed. This mode is used when the property is
unoccupied.
All sensors will be disarmed.
Note: When the system is set to 'Disarm', sensors in 24-Hour Zone (flood
sensors, smoke detectors, etc) will remain active.
Sensors which are set to the Home Zone will be disarmed. All other
sensors will be armed. This mode allows for movements within the
property without triggering the Home Zone sensor(s), such as motion.
This will trigger an 'emergency' alert notification to registered users
regardless of the hub mode.
07
Disarm Button
SOS Button
System Status
Door / Window Sensor
Door/window sensors are set to 'Normal Zone' by default and are ideal for protecting
entry/exit points, such as front/back doors and all windows. When the system is armed
and a sensor is triggered (magnet separated from the transmitter), a push notification
including the sensor name will automatically be sent to the registered users, and the
hub's internal siren will sound immediately.
LED Indicator
Transmitter
Magnet
Blinks once Door/window opening detected
Low battery indication, please change the
Blinks once per 3 seconds
battery immediately
Tamper Switch
The tamper switch (small black lever underneath the back cover) will trigger an alarm
notification if an unauthorized attempt is made to remove the sensor from its installed
location.
Tamper Switch
08