Chuango H4 PLUS User Manual page 9

3. Connect the hub to your smartphone
Tap "Next" and select "Home Cloud System" from the WiFi list on your smartphone.
Note: "Home Cloud System" is the hotspot name for connecting to your system.
Android users may need to disable cellular (mobile) data before proceeding to this
step. This setting is normally found in your smartphone's settings under Data Usage, or
Mobile Networks.
If you're unable to find the setting location, we suggest using a search engine with the
following syntax: Disable (Phone Model) cellular data.
4. Enter WiFi details for the hub
Pick your home WiFi network (2.4GHz) from the display listed on the app, and enter
the WiFi network password. This binding process should take about 3 minutes. The
WiFi indicator will stop blinking when the network is connected.
13
How to Change WiFi?
Tap on [Settings]-[Others]-[Network Configuration]-[Change WiFi], select the WiFi
name and then enter the password. The WiFi indicator will stop blinking when the
network is connected.
2. GPRS Connection
Preparations before Use
1. A regular-size 2G/3G/4G* SIM card is needed to be inserted into the hub's SIM slot.
2. Connect the Hub with the provided AC adapter.
3. Turn the power switch of the hub from "OFF" to "ON".
*If using 3G/4G SIM card, make sure the 2G network of this cellular operator is still
available in your country.
There are two scenarios for GPRS: 1. You have home WiFi and GSM is used as a
backup. 2. You don't have home WiFi and GSM is used for sending notifications, SMS
and phone calls.
For the first scenario, connect to the WiFi by following the instructions in WiFi
Connection above To set up GPRS, go to Settings - My Hub - APN Setting, input
required information for cellular data and tap OK.
14