Chuango G5 User Manual
Hide thumbs
Also See for G5:
- User manual (30 pages) ,
- Installation manual (29 pages) ,
- Manual (18 pages)
Related Manuals for Chuango G5
Summary of Contents for Chuango G5
-
Page 1: Alarm System
Alarm System User Manual Printed in China 2014 Chuango. All rights reserved. PA: OI-G5-EN-1406-V2.2-2... -
Page 2: Table Of Contents
Contents Congratulations on buying this Chuango G5 alarm system. Installing the Chuango G5 Overview of the Chuango G5 alarm system ---------------------------------------------- alarm system is easy and quick. Before using the product we recommend you read the In the box ----------------------------------------------------------------------------- manual first. - Page 3 TAG-26 (RFID tag) ----------------------------------------------------------------- Disarm ----------------------------------------------------------------------------------- Troubleshooting ------------------------------------------------------------------------- 46~48 Home mode ----------------------------------------------------------------------------------- Cautions and warnings ----------------------------------------------------------------- Mute mode ----------------------------------------------------------------------------------- Terms of warranty ------------------------------------------------------------------------- Emergency call ----------------------------------------------------------------------------------- Notes ----------------------------------------------------------------------------------- — Connect a new remote control ----------------------------------------------------------------------------------- Download the G5 alarm APP -------------------------------------------------------------...
-
Page 4: Overview Of The Chuango G5 Alarm System
Overview of the Chuango G5 alarm system In the box Rear Side GSM network indicator Microphone Tamper switch Loudspeaker Status indicator Touch screen Back-up batteries Disarm Call Home mode RFID tag reader/play voice memo Record voice memo... -
Page 5: Included Accessories
Included accessories Operating principle of the alarm system The Chuango G5 Alarm System has the following accessoires included in the box: The alarm system will receive a signal when a sensor has been triggered. The control panel will sound the alarm and send an SMS to all stored phone numbers. When texting is done it will call stored phone numbers. -
Page 6: Sensors
Sensors Grouping sensors Each sensor can be placed in a group. Four different groups can be selected. The home group, normal group, 24-hour group or a single zone group. Sensor placement The alarm system is more effective with well-placed and set sensors. Determine which areas you want to monitor and with which sensor. -
Page 7: Changing Sensor Names
Getting Started Single delay group: One or more detectors can be set in single delay group that will alarm at the specified time after being triggered. The state is usually used for door/window contact on the entrance. For example, if the user does not want to carry Inserting SIM card the remote control, he/she can set the door/window contact in single delay group and set the time to 30 seconds. -
Page 8: Turning On The Control Panel
Turning on the control panel Connect the power adapter to the connector in the back of the system. Then slide the power switch to `On'. ‘5’ Store alarm phone No. ‘6’ Store alarm SMS No. Network connection (indicator) ‘7’ Store SMS No. for RFID tags After switching on the system, the network indicator lights up once every 1 second. -
Page 9: Control Panel Operation
Control Panel Operation Record and play back voice message Press the button for 3 seconds to record a personal message up to 10 seconds. If your Arming the system (‘Normal group’) message is shorter than 10 seconds, press the Press . -
Page 10: Phone Dial
If you want to partially arm the system you only have to send a ‘2’ to the number of the SIM card in the control panel. Home Mode (Stay) Note: The language can also be set in the G5 Alarm App. System in home mode. -
Page 11: Two-Way Talk
The message can be played back by pressing the blue circle. Adding an account The alarm system can be operated with the G5 Alarm App. When using the Apple App there will be set up a SMS text message automatically for every function. Press the ‘... -
Page 12: G5 Alarm App Overview
Home arm Disarm System armed Record Entry and exit delay time: 0sec Two-way talk voice memo Single zone delay time: 30sec Siren volume: 2 Siren ringing time: 5min Disarm password: 1234 In the G5 Alarm App press the following button:... -
Page 13: Store Emergency Telephone Numbers
Store emergency telephone numbers With the G5 Alarm App this setting can be done as follows: Emergency numbers are the telephone numbers which have to be called when the alarm goes off. To get a list of the current settings, send ‘5’ to the control panel. -
Page 14: Store Sms Number For Rfid Tags
Store SMS number for RFID tags Store speed dial number The SMS number for RFID tag is the number which will be used to send a text message In this menu you can assign a phone number that will be stored as speed dial number. to when a RFID tag is used to disarm the system. -
Page 15: Change Sensors Name
Change sensors name Change RFID tags name Every sensor can be named. Each sensor is referred to as a zone. The first 9 sensors (1- With this menu you can adjust the names linked to the RFID tags. 9) can be changed according to personal reference. Each sensor (zone) has 30 free characters to fill in a new name. -
Page 16: Change Entry/Exit Delay Time
Change entry/exit delay time Setting alarm volume and duration The system can be armed or alarmedwith a time delay. When a delay time is set you Both alarm volume and duration of the siren can be adjusted in this menu. will hear a beep every second as a warning of this delay. -
Page 17: Change Disarm Password
Change disarm password Setting single zone delay time Left is the response message of the alarm Below is the response message of the alarm system shown when texting ‘14’ to the Disarm password(4-6 digits): system shown when texting ‘13’ to the control control panel. -
Page 18: Delete Wireless Sensors By Sms
Delete wireless sensors by SMS Delete all remote controls by SMS All accessories (wireless sensors, RFID tags and remote controls) can be removed from All remote controls can be removed by texting ‘23’ to the SIM card number in the the system by pressing the tamper switch 3 times within 3 seconds. -
Page 19: Arm & Disarm By Free Phone Call
Arm & Disarm by free phone call Remote control Arming the alarm system can be done by calling the SIM card telephone number in the control panel. When you hear the dialling tone, hang up. You will be called back by Remote control overview the same number. -
Page 20: Home Mode
Pet-Immune PIR Motion Detector Home mode PIR motion detector overview Press . All sensors in the normal group will be activated. All sensors in the home group will be inactive. This means you can partially arm the house. Mute mode 1. -
Page 21: Inside Pir Motion Detector
Inside PIR motion detector Backside PIR motion detector Carefully remove the front from the back. Test mode After self-testing, press the test button once. The PIR motion detector will emit a LED ON / OFF Infrared sensor detection signal (LED flash once). Tamper switch Test button Groupsetting... -
Page 22: Installing Pir Motion Detector
Installing PIR motion detector Test mode PIR motion detector Avoid installing the motion detector directly toward windows, near airconditioning, Once the motion detector is fully installed and active, the detector can be tested. Press heating, refrigerator, oven, direct sunlight and places where many temperature the test button once and walk from left to right or right to left in the room. -
Page 23: Led Indicator
LED indicator IMPORTANT: On both parts there can be found a triangle which should be Blink once : Door/window open detected pointing towards each other. Blink once per 3 seconds : Low batter y indication, please change the batteries immediately. Connecting magnet contact Note: When battery level is low you will receive an SMS for notifcation. -
Page 24: Installing Control Panel
Technical Specifications Installing Control Panel The control panel can be mounted to the wall or can be put on a bracket on a desk Control panel with the included accessories showed below. Power Supply 12V DC 500mA GSM Frequency 850 / 900 / 1800 / 1900MHz Standby Current... -
Page 25: Pir-910 Wireless Pir Motion Detector
PIR-910 Wireless PIR Motion Detector DWC-102 Wireless Door/Window Contact Power Supply 3V DC (2 x AA 1,5V LR6) Power Supply 1,5V DC (1 x AA 1,5V LR6) Standby Current Standby Current ≤ 90uA ≤ 35uA ≤ 9.5mA ≤ 10mA Alarm Current Alarm Current Detection Range 8 m / 110°... -
Page 26: Rc-80 Wireless Remote Control
RC-80 Wireless Remote Control Troubleshooting DC 3V Power Supply When the G5 alarm system is not working properly please try following solutions: (one CR2025 button cell batter y) Transmit Current ≤ 7mA Problems Reason/Solution Wireless Transmitting Distance ≤ 80 m (open field/no interference) -
Page 27: Troubleshooting
Troubleshooting Swiping RFID tags Check if RFID SMS notification number and RFID tags without sending Make sure the inserting direction of SIM card is right name are stored SMS notification Make sure inserting the SIM card first before powering on The detector, remote Press the tamper switch on the bottom of control panel for The control panel... -
Page 28: Cautions And Warnings
Always follow the instructions in the manual, especially when it concerns devices which wear pattern than the main product are therefore not covered by the Chuango need to be assembled. -
Page 29: Notes
Notes Download the G5 alarm APP Group Sensor type Sensor Name Normal Home 24/7 Single Door/window Zone 1 contact Zone 2 Motion detector Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 Zone 9 Zone 10 Zone 11...