Table of Contents
Advertisement
Figure 21
Auxiliary Files Screen (MGCP / MEGACO Gateways)
To save the loaded auxiliary files to flash memory, follow these 2 steps:
1
Click the Save Configuration button on the main menu bar; the 'Save Configuration to
the Flash Memory' screen is displayed.
Saving an auxiliary file to flash memory may disrupt traffic on the V6100. To
avoid this, disable all traffic on the device before saving to flash memory.
2
Click the Save Configuration button in the middle of the screen; a confirmation
message appears when the save is complete.
A device reset is required to activate a loaded CPT file, and may be required
for the activation of certain ini file parameters.
To reset the V6100, follow these 2 steps:
1
Click the Reset Device button on the main menu bar; the 'Reset' screen is displayed.
2
Click the Reset button in the middle of the screen; the auxiliary files are saved into flash
and the V6100 restarts.
V6100 Digital Gateway Installation Guide
45
Advertisement
Table of Contents
