3Com v6100 Installation Manual page 40

Figure 14 Start Software Upgrade Screen
At this point, the process can be canceled with no consequence to the V6100
(click the Cancel button). If you continue the process (by clicking the Start
Software Upgrade button, the process must be followed through and completed
with a V6100 reset at the end. If you click the Cancel button in any of the
subsequent screens, the V6100 is automatically reset with the configuration that
was previously burned in flash memory.
3 Click the Start Software Upgrade button; the 'Load a cmp file' screen appears
(Figure 15).
When in the Wizard process, the rest of the Web application is unavailable and the
background Web screen is disabled. After the process is completed, access to the
full Web application is restored.
Figure 15 Load a cmp File Screen
4
Click the Browse button, navigate to the cmp file and click the button Send File; the cmp
file is loaded to the V6100 and you're notified as to a successful loading (see
40 V6100 Digital Gateway Installation Guide
Figure 16).