Table of Contents
Advertisement
Assigning an IP Address Using BootP
BootP procedure can also be performed using any standard compatible BootP
server.
You can also use BootP to load the auxiliary files to the V6100 (refer to the V6100
Digital Gateway User Guide
To assign an IP address using BootP, follow these 12 steps:
1
Open the BootP application (supplied with the V6100 software package).
2
Click on the Edit Clients icon;
the 'Client Configuration' screen is displayed.
3
Click on the Add New Client icon;
a client with blank parameters is displayed
4
In the 'Client MAC' field, enter the MAC address of the gateway. The MAC address is
printed on a label located on the base of the V6100.
5
Verify that the box to the right of the 'Client MAC' field is checked. This enables the
particular client in the BootP tool (if the client is disabled, no replies are sent to BootP
requests).
6
In the 'Client Name' field, enter a descriptive name for this client so that it is easier to
remember which gateway the record refers to. For example, this name could refer to the
location of the gateway.
7
In the 'IP' field, enter the IP address you want to assign the gateway. Use the normal
dotted decimal format.
8
In the 'Subnet' field, enter the subnet mask you want to assign the gateway. Use the
normal dotted decimal format. Ensure that the subnet mask is correct. If the address is
incorrect, the gateway may not function until the entry is corrected and a BootP reset is
applied.
9
In the 'Gateway' field, enter the IP address for the default gateway. If you do not know
the IP address for the default gateway, contact your network administrator.
10 Click Apply to save this entry to the list of clients.
11 Click OK; the 'Client Configuration' screen is closed.
12 Use the reset button (located on the V6100 CPU module) to physically reset the gateway
causing it to use BootP; the V6100 changes its network parameters to the values
provided by the BootP.
V6100 Digital Gateway Installation Guide
(Figure
4).
17
Advertisement
Table of Contents
